Welcome to our website! 
If you have an account, you may need to create a new password the first time you log in. 
If you have any difficulty, please contact us.

Atlas Model Railroad Co.

Locomotive, diesel, EMD GP40-2(W), CN #9650, stripes - DCC/sound

(No reviews yet) Write a Review
SKU:
150-10004423
Availability:
Pre-order only. You may be charged a deposit.
$324.95

Description

"In 1973 Canadian National (CN) designed the safety cab, also known as the comfort cab, which featured a full-width nose that was intended to improve crew safety in the event of a collision. The first CN locomotives to feature this cab were GMDD GP38-2s and MLW M420s. GO Transit ordered the first safety cab equipped GP40-2s in 1973 with a three-unit order. CN then ordered their first safety cab GP40-2s from GMDD in 1974. Using CN’s locomotive classification system, these locomotives were assigned the designation GF-430 (General Motors, Freight, 4-axle, 3000hp). Letters are added after this designation to denote the separate orders for a given model.

Our model represents the GF-430d series, of which 34 were built in 1976: CN 9633-9667. This order was constructed using a standard GP40-2 frame. Earlier GF-430 models were built on a frame that was a noticeable 4-5 inches taller. GO Transit would order a total of 11 safety cab equipped GP40-2s and all were built with similar dimensions to the CN GF-430d series. These units were later sold to Canadian National and renumbered as CN 9668-9677.

The terminology “early” and “late” is used when referring to various road names on this run. “Late” CN and former CN units feature ditch lights, snow shields and have their air horn relocated to the top of the long hood. GO Transit units will be “early” in that they will not include ditch lights or snow shields, and the air horn will be mounted above the bell.

This GP40-2(W) model features many prototype-specific and separately-applied details, including:

  • Long Hood Styles: CN (single light w/o number boards)
  • 3,000 Gallon Fuel Tank
  • CN-Style Lighted Ditch Lights (optional)
  • Snow Shields (optional)
  • Round or Square Sand Fill Hatches
  • Cab-Mounted Bell
  • Three-Chime Air Horn Mounted on Cab or Long Hood
  • Etched Metal Radiator Fan Grilles

Also includes “standard” features of the GP40-2 model:

  • Golden-white LEDs
  • Realistic die-cast underframe
  • Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
  • Directional lighting
  • Factory-equipped with AccuMate® knuckle couplers
  • Detailed cab interior with crew figures
  • Separately-installed scale windshield wipers, grab irons and fine scale handrails
  • Movable drop steps
  • Walkway safety tread
    Coupler cut levers
  • Multiple unit hoses and trainline hoses
  • Snowplow

Atlas Master™ Series Silver additional features:

  • NMRA 8-pin plug for DCC (Decoder-ready)

Atlas Master™ Series Gold additional features:

  • DCC - ESU LokSound-equipped

DCC operation features:

  • Supports all DCC-programming modes
  • Flexible mapping of function keys F0 to F28
  • A total of six DCC function outputs are available
  • Follows all NMRA DCC standards and recommended practices

Analog (DC) operation features:

  • The LokSound Select Dual-Mode decoder allows your Atlas Gold Series locomotive to be used on DC as well as on DCC layouts.
  • Please note that the Atlas Quantum Engineer will NOT operate an Atlas Gold Series locomotive equipped with a LokSound Select decoder on an analog (DC) layout. However, the sound and lighting functions of the LokSound Select decoder in the Atlas Gold Series locomotive can be controlled by an easy-to-use basic DCC system
    Also note that on a DC-powered layout, a DCC and sound equipped locomotive CANNOT be consisted with another locomotive that does not also have both DCC and sound. (This statement does NOT apply to DCC-equipped locomotives operating on a DCC layout.)

ESU LokSound functionality features:

  • Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
  • There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
  • Manual and Automatic Notching modes with the ability to change modes ”on the fly” are provided for true realism.

AccuMate® couplers are made under license from AccuRail, Inc.

See the "Manufacturer" page for general delivery and pricing information.

 

View AllClose

Additional Information

Scale:
HO
Roadname:
CN
View AllClose

Subscribe to our newsletter

Get the latest modelling news, store specials, and new arrivals delivered to your inbox.