Digitrax, Inc.
Occupancy detector, "LocoNet", 8 sections
(No reviews yet)
Write a Review
- SKU:
- 245-BXP88
- Availability:
- Available. Current stock: 0
Description
BXP88 makes adding detection and transponding to your layout easier than ever. No more complicated wiring!
Features:
- DCC Occupancy Detection supports up to 8 detection sections letting you know when equipped rolling stock is in a detection section on your layout.
- One Transponding Zone per detection section lets you know the location of transponder-equipped locos or rolling stock.
- Intelligent Automatic short-circuit and over-current power management for each detection section, improves reliability by avoiding most booster fault shutdowns.
- Connects to LocoNet to transmit detection section occupancy, transponding and track power information.
- Detects any powered locomotives in a detection section.
- Identify where specific rolling stock is on your layout with Digitrax transponder-equipped locos and rolling stock.
- Detects rolling stock equipped with resistor wheel sets.
- Plug and Play with Digitrax DCC systems with automatic Railsync polarity detection.
- LED output headers for front panel indication of detection section occupancy, transponding, and power status.
- Easy-connect pluggable track wire terminal blocks can plug-in straight or at right angles.
- 3A capacity per detection section; 8A total unit capacity.
- Automatically updates status at track power on.
- Operations Mode Read Back allows you to read CV values of decoders equipped with transponders when on track.
- Firmware update capability via IPL over LocoNet.
See the "Manufacturer" page for general delivery and pricing information.
Related Products
Occupancy detector, "LocoNet", 16 sections
Digitrax, Inc.
MSRP:
$165.17
$149.95
The BDL168 is a cost effective LocoNet Occupancy Detector for 16 detection sections. It lets you know when detection sections of your layout are occupied. When used in conjunction with one or two RX4...
- SKU:
- 245-BDL168
- Availability:
- Sold out after current stock is depleted.
- Scale:
- All Scales
Occupancy detector, "LocoNet", 4 sections
Digitrax, Inc.
$42.75
Features: Low-cost, High-sensitivity DCC block-occupancy detection. Adjustable resistance/current detection section (DS) trip threshold. 8A capacity, suitable for all scales and...
- SKU:
- 245-BD4N
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
Cable, "LocoNet", 8' (x2)
Digitrax, Inc.
$13.95
Convenient pre-made, pre-tested cables, ready to use on your layout. See the "Manufacturer" page for general delivery and pricing information.
- SKU:
- 245-LNC82
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
Occupancy detector/auto reverser/power manager
Digitrax, Inc.
$56.50
The BXPA1 is a combination DCC auto-reverser, occupancy detector, transponding detector and intelligent power manager. It is designed to make transponding implementation easy and provide advanced DCC...
- SKU:
- 245-BXPA1
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
Cable, "LocoNet", 50'
Digitrax, Inc.
$31.25
Pre-made, pre-tested 50 foot "LocoNet" cable. Use on any "LocoNet" layout. Use for long runs or divide into custom lengths using "LocoNet" cable maker kit & RJ12 plugs. See the "Manufacturer"...
- SKU:
- 245-LNC501
- Availability:
- Available. Current stock: 4
- Scale:
- All Scales
Tester, decoder/"LocoNet" cable
Digitrax, Inc.
$6.95
It consists of a harness with 6 conductor Telco type wire with a male plug, a tester with a female 6 conductor jack, and a 100 Ohm 2 watt protection resistor. See the "Manufacturer" page for general...
- SKU:
- 245-LT1
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
Panel, interconnect, "LocoNet", universal.
Digitrax, Inc.
$21.95
Features:
Plug and Play Universal fascia panel supporting LocoNet.
Two RJ12 front panel Throttle jacks.
Three RJ12 rear pass-through LocoNet jacks
Supports throttle charging.
Fully connectorized...
- SKU:
- 245-UP7
- Availability:
- Available. Current stock: 3
- Scale:
- All Scales
Interface module, "LocoNet" to WiFi
Digitrax, Inc.
$94.95
The LNWI allows you to connect compatible WiFi devices to LocoNet and run trains using compatible throttle apps. Features: Wi-Fi interface to a Digitrax LocoNet for up to four compatible mobile...
- SKU:
- 245-LNWI
- Availability:
- Available. Current stock: 3
- Scale:
- All Scales
Cable, "LocoNet", 16' (x2)
Digitrax, Inc.
$21.95
Convenient pre-made, pre-tested cables, ready to use on your layout. See the "Manufacturer" page for general delivery and pricing information.
- SKU:
- 245-LNC162
- Availability:
- Available. Current stock: 3
- Scale:
- All Scales