Tools/Finishing
-
Adhesives/Cleaners/ LubricantsTools
-
Ballast spreader (HO)
Bachmann Industries
$29.95Spread ballast the easy way with the Bachmann HO Scale Ballast Spreader. The clear-acrylic device features an internal slop sheet that routes ballast for precise placement on either side of the rails and in between as you slide it along the track. Works...- SKU:
- 160-39001
- Availability:
- Available. Current stock: 2
- Scale:
- HO
$29.95 -
Cleaner & conditioner, track
Labelle Lubricants
$15.25Now you can not only clean your track but you can condition the rails for top-notch performance of all your motive power. This conditioner will clean your track while laying down a non-slippery conductive film that will improve current flow. Use to...- SKU:
- 430-105
- Availability:
- Available. Current stock: 3
$15.25 -
Cleaner, "Roto Wheel Cleaner", HO
Woodland Scenics Co.
$35.50Set your cars and locomotices in place and let "Roto" wheel cleaner do the work. Powered from transformer or track. Includes replacement pads. Will not scratch wheels. Cleans all wheels at once. See the "Manufacturer" page for general...- SKU:
- 785-4561
- Availability:
- Available. Current stock: 1
- Scale:
- HO
$35.50 -
Cleaner, locomotive driver, "Speedi" brush, HO
Kadee Quality Products Co.
$22.25Quickly and simply spins dirt and gum from locomotive drive wheels. Restores electrical pickup, eliminates erratic locomotive performance due to dirty, scummed wheel treads! Just clip brush leads any place on running rails, or to 12 volt DC power source...- SKU:
- 380-236
- Availability:
- Available. Current stock: 2
- Scale:
- HO
$22.25 -
Cradle, locomotive
Bowser Manufacturing
$18.95Shaped foam cradle gives you a gentle helping hand when working on the underside of your locos and cars. Also has a compartment for holding small parts like screws, trucks, couplers etc. See the "Manufacturer" page for general delivery and...- SKU:
- 1-22
- Availability:
- Available. Current stock: 1
- Scale:
- HO
$18.95 -
Gauge, standards, HO
Miscellaneous
$26.95Designed and developed by the NMRA (National Model Railroad Association) engineering committee, this pocket sized gauge enables you to check all important dimensions on your track and rolling stock as follows:* Gauge of track and turnouts* Flangeway...- SKU:
- 98-1
- Availability:
- Available. Current stock: 1
- Scale:
- HO
$26.95 -
Gauge, track, Code 100
Micro Engineering
$13.253-point diecast metal, to align track. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 255-42101
- Availability:
- Available. Current stock: 1
- Scale:
- HO
$13.25 -
Gauge, track, Code 70
Micro Engineering
$13.253-point diecast metal, to align track. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 255-42103
- Availability:
- Available. Current stock: 0
- Scale:
- HO
$13.25 -
Gauge, track, Code 83
Micro Engineering
$13.253-point diecast metal, to align track. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 255-42102
- Availability:
- Available. Current stock: 1
- Scale:
- HO
$13.25 -
Lubricant set, 3-pack assortment (HO)
Labelle Lubricants
$39.50Includes one each Plastic Compatible Gear Lubricant, Plastic Compatible Grease with PTFE and Plastic Compatible Motor Oil. For HO, O, S, On30, Lionel, LGB and all larger size trains. Comes with 7-1/2" extension needle adapter for those hard-to-reach...- SKU:
- 430-1001
- Availability:
- Available. Current stock: 2
- Scale:
- HO
$39.50 -
Ramp, re-rail
Kato USA
$8.50Set it on the track and roll rolling stock down ramp; it automatically places wheels on track. Features "Uni-Joiner" removal tool. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 381-2502
- Availability:
- Available. Current stock: 4
- Scale:
- HO
$8.50 -
Ramp, re-rail "Rail-It"
Rix Products
$4.75Set it on the track and roll rolling stock down ramp; it automatically places wheels on track. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 628-2
- Availability:
- Available. Current stock: 3
- Scale:
- HO
$4.75 -
Ramp, re-rail.
Peco
$9.95See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 552-SL-37
- Availability:
- Available. Current stock: 2
- Scale:
- HO
$9.95 -
Roller "E-Z Riders", display/test (x4)
Bachmann Industries
$105.95These handy ball-bearing rollers allow you to run your locomotives in place on your workbench or in a display case. Simply place them on a powered piece of track and place one under each of the powered axles. They work for HO and On30 locomotives. See...- SKU:
- 160-42901
- Availability:
- Available. Current stock: 0
- Scale:
- HO
$105.95 -
Rule, transparent, HO
Microscale Industries Inc.
$2.50See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 460-03-01
- Availability:
- Available. Current stock: 0
- Scale:
- HO
$2.50 -
Service tray, locomotive
ESU
$32.25The ESU Premium Foam Train Service Tray is the ideal tool for the maintenance and care of your locomotives. Two recesses are available for perfect work: The locomotive can be clamped upside down to comfortably reach the underbody of the locomotive. In...- SKU:
- 397-41010
- Availability:
- Available. Current stock: 0
- Scale:
- HO
$32.25
Subscribe to our newsletter
Get the latest modelling news, store specials, and new arrivals delivered to your inbox.