Digitrax, Inc.
Controller, auto reversing, one reversing district
(No reviews yet)
Write a Review
- SKU:
- 245-AR1
- Availability:
- Available. Current stock: 4
Description
Features:
- Cost effective automatic reversing for one reversing section or subdistrict
- User selectable trip current lets you adjust the AR1 to work with any scale or equipment on your layout
- Auto-Reversing manages polarity mismatches on the reversing track section without manually throwing electrical toggle switches or adding another booster
- 8 amp peak, 6 amp continuous Auto-reversing control for a single reversing district.
- Simple to wire 4 wire hookup, no locomotive wiring required
- No external power required, runs off track power
- AR1 operates with or without LocoNet, so it is compatible with all DCC systems.
See the "Manufacturer" page for general delivery and pricing information.
Related Products
Occupancy detector/auto reverser/power manager
Digitrax, Inc.
$56.50
The BXPA1 is a combination DCC auto-reverser, occupancy detector, transponding detector and intelligent power manager. It is designed to make transponding implementation easy and provide advanced DCC...
- SKU:
- 245-BXPA1
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
Booster, dual, 3/5/8A, auto-reversing
Digitrax, Inc.
$269.95
These new advanced boosters are designed to give you more power to run your trains. The new boosters offer 3A, 5A, or 8A of output power to better match the command station of your choice...
- SKU:
- 245-DB220
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
Booster, single, 3/5/8A, auto-reversing
Digitrax, Inc.
$179.95
These new advanced boosters are designed to give you more power to run your trains. The new boosters offer 3A, 5A, or 8A of output power to better match the command station of your choice...
- SKU:
- 245-DB210
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
Booster, single, 3/5/8A, auto-reversing, opto-isolated
Digitrax, Inc.
$204.95
These new advanced boosters are designed to give you more power to run your trains. The new boosters offer 3A, 5A, or 8A of output power to better match the command station of your choice...
- SKU:
- 245-DB210-OPTO
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
Automatic reverser "AR10", with circuit breaker
NCE Corp.
$77.95
The AR10 is an automatic reverse loop controller for DCC layouts. It requires just 4 connections, two to the main line and two to the loop. In addition it functions as a circuit breaker for the...
- SKU:
- 524-233
- Availability:
- Available. Current stock: 2
- Scale:
- All Scales
Automatic reverse "AR-2", w/adjustable delay
Circuitron
$72.50
Same as AR-1, but with adjustable delay to hold train at sensor before reversing. Adjustable delay from one second to over one minute. Can be connected to pushbutton or DT-4 to permit stops and...
- SKU:
- 800-5401
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
Automatic polarity reverser "Mono Frog Juicer", 1 frog
Tam Valley Depot
$20.75
For all DCC systems including NCE PowerCab. This board is an automatic polarity reverser for a single frog. Setup is simple, connect two wires to the DCC bus and one wire to a frog. ...
- SKU:
- TAM-MFJ003U
- Availability:
- Available. Current stock: 6
- Scale:
- All Scales
Automatic polarity reverser "Dual Frog Juicer", 2 frogs
Tam Valley Depot
$49.95
For all DCC systems including NCE PowerCab. This board can be configured to use as an automatic polarity reverser for two frogs, a reversing loop, a turntable, a wye, or a crossing. It...
- SKU:
- TAM-DFJ003U
- Availability:
- Available. Current stock: 5
- Scale:
- All Scales
Automatic polarity reverser "Hex Frog Juicer", 6 frogs
Tam Valley Depot
$112.50
For 2A to 8A DCC systems, including NCE PowerCab. This board can be configured to use as an automatic polarity reverser for six frogs, or a reverser for one to three reversing loops,...
- SKU:
- TAM-HFJ003U
- Availability:
- Available. Current stock: 12
- Scale:
- All Scales