Digital Command Control (DCC)
-
DCC AccessoriesDCC DecodersDCC Starter Sets
-
Interface module, "LocoNet" to WiFi
Digitrax, Inc.
$94.95The LNWI allows you to connect compatible WiFi devices to LocoNet and run trains using compatible throttle apps. Features: Wi-Fi interface to a Digitrax LocoNet for up to four compatible mobile Wi-Fi devices and Apps Compatible with most Android and...- SKU:
- 245-LNWI
- Availability:
- Available. Current stock: 5
- Scale:
- All Scales
$94.95 -
Modular adaptor (RJ12) (x3)
Digitrax, Inc.
$13.95Use for joining "LocoNet" cables, adding coiled cords to throttles, etc. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-LNMC3
- Availability:
- Available. Current stock: 3
- Scale:
- All Scales
$13.95 -
Mounting kit, terminal strip
Digitrax, Inc.
$19.50Each terminal strip board can handle from 1 to 4 signal heads. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-TSMK
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$19.50 -
Occupancy detector, "LocoNet", 16 sections
Digitrax, Inc.
$174.95The BDL168 is a cost effective LocoNet Occupancy Detector for 16 detection sections. It lets you know when detection sections of your layout are occupied. When used in conjunction with one or two RX4 transponder detectors it operates up to 8 transponding...- SKU:
- 245-BDL168
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$174.95 -
Occupancy detector, "LocoNet", 4 sections
Digitrax, Inc.
$42.75Features: Low-cost, High-sensitivity DCC block-occupancy detection. Adjustable resistance/current detection section (DS) trip threshold. 8A capacity, suitable for all scales and track wiring configurations. Noise resistant and...- SKU:
- 245-BD4N
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$42.75 -
Occupancy detector, "LocoNet", 8 sections
Digitrax, Inc.
$204.95BXP88 makes adding detection and transponding to your layout easier than ever. No more complicated wiring! Features: DCC Occupancy Detection supports up to 8 detection sections letting you know when equipped rolling stock is in a detection...- SKU:
- 245-BXP88
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$204.95 -
Occupancy detector/auto reverser/power manager
Digitrax, Inc.
$56.50The BXPA1 is a combination DCC auto-reverser, occupancy detector, transponding detector and intelligent power manager. It is designed to make transponding implementation easy and provide advanced DCC track management by communicating all state...- SKU:
- 245-BXPA1
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$56.50 -
Panel, interconnect, "LocoNet", universal.
Digitrax, Inc.
$21.95Features: Plug and Play Universal fascia panel supporting LocoNet. Two RJ12 front panel Throttle jacks. Three RJ12 rear pass-through LocoNet jacks Supports throttle charging. Fully connectorized installation. 2mm rear plug for e.g. PS14 DC power supply...- SKU:
- 245-UP7
- Availability:
- Available. Current stock: 3
- Scale:
- All Scales
$21.95 -
Plug, booster terminal, black
Digitrax, Inc.
$9.25Black replacement terminal plug for lost or damaged plugs on DB220 booster. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-BLKBOOSTPLU
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$9.25 -
Plug, booster terminal, grey
Digitrax, Inc.
$7.95Grey replacement terminal plug for lost or damaged plugs on Digitrax Command Stations and Boosters. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-BOOSTERTERMPLUG
- Availability:
- Available. Current stock: 6
- Scale:
- All Scales
$7.95 -
Plug, Digitrax 9 pin (x5)
Digitrax, Inc.
$25.50Replaces 9 pin plug-equipped decoder for DC operation of locomotive. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-DHDP
- Availability:
- Available. Current stock: 1
- Scale:
- HO
$25.50 -
Plug, Digitrax 9 pin (x5) (N)
Digitrax, Inc.
$25.50Replaces 9 pin plug-equipped decoder for DC operation of locomotive. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-DNDP
- Availability:
- Available. Current stock: 0
- Scale:
- N
$25.50 -
Plug, RJ12 (x20)
Digitrax, Inc.
$13.95Use with crimper tool to make custom length "LocoNet" cables and replace broken plugs. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-LNRJ12P20
- Availability:
- Available. Current stock: 5
- Scale:
- All Scales
$13.95 -
Power manager, 4 sub-districts
Digitrax, Inc.
$124.95Features: 4 Power Manager sub-districts. Upgraded replacement for PM42, fully encased. Fully connectorized installation. Each Power sub-district / Detection Section (DS) supports Auto-reverse or Short circuit management. Each DS supports Occupancy...- SKU:
- 245-PM74
- Availability:
- Available. Current stock: 4
- Scale:
- All Scales
$124.95 -
Power manager, 4 sub-districts.
Digitrax, Inc.
$84.95Get the benefits of short circuit management and auto reversing without adding more boosters! PM42 Quad Power Manager lets you use a single booster and divide its output into 4 power sub-districts for automatic reversing or to improve operation by...- SKU:
- 245-PM42
- Availability:
- Sold out after current stock is depleted.
- Scale:
- All Scales
$84.95 -
Power supply, 300mA, 14V
Digitrax, Inc.
$18.50Recommended for powering accessories like the BDL168, DS64, LNRP, SE8C, UP5, UR90 and UR91. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-PS14
- Availability:
- Available. Current stock: 8
- Scale:
- All Scales
$18.50 -
Power supply, ac/dc, universal, 90W
Digitrax, Inc.
$91.95PS615 90W ac/dc 15Vdc 6A power supply for use with all Digitrax Command Stations and Boosters operating at 5 amps. Features: High-efficiency power supply, 15 Vdc output Accepts different cord sets Meets MEPS VI and DOE VI efficiency standards CE for...- SKU:
- 245-PS615
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$91.95 -
Power supply, regulated, 20A, w/ammeter
Digitrax, Inc.
$269.95This power supply replaces the PS2012 to meet new efficiency requirements for DC power supplies. It delivers more power with less heat for more efficient operation. The 20 amp PS2012E regulated power supply can be used to operate up to 4 five amp...- SKU:
- 245-PS2012E
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$269.95 -
Programmer/interface, USB "PR4"
Digitrax, Inc.
$107.95The PR4 makes decoder programming and interfacing your layout and computer easier than ever. It seamlessly switches between computer interface and decoder programming modes automatically without having to press any buttons. It is electrically isolated...- SKU:
- 245-PR4
- Availability:
- Available. Current stock: 6
- Scale:
- All Scales
$107.95 -
Receiver, transponding, 4-zone, add-on
Digitrax, Inc.
$62.25Add-on for BDL16x series occupancy detectors. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-RX4
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$62.25
Subscribe to our newsletter
Get the latest modelling news, store specials, and new arrivals delivered to your inbox.