Welcome to our new website! 
If you have an account, you may need to create a new password the first time you log in. 
If you have any difficulty, please contact us.

Tam Valley Depot

Tam Valley Depot

This US company was manufacturing a growing line of model railway electronics, mostly for turnout control (frog juicers, servos, switch machines, drivers, boosters, faschia parts etc.) However, recently the company was forced to drastically reduce the product line due to staffing and parts availability. We have listed the most popular of the remaining items in the Store but can supply all as a dealer.

Scales Listed

All
 

Canadian Express Line Prices

Our prices are discounted approximately 10% from the MSRP.
(We review the CAN/USD exchange rate on a monthly basis and update Store prices as appropriate).
 

Delivery Information

Most items are available on a continual basis. As far as we are aware all items listed in the Store are currently available.
Backordered items usually take 3-4 weeks to obtain.
 

Website

Tam Valley Depot

  • Automatic polarity reverser "Dual Frog Juicer", 2 frogs

    Automatic polarity reverser "Dual Frog Juicer", 2 frogs

    Tam Valley Depot

    $46.75
    For all DCC systems including NCE PowerCab.  This board can be configured to use as an automatic polarity reverser for two frogs, a reversing loop, a turntable, a wye, or a crossing.  It uses the same basic design as the hex frog juicer but has...
    SKU:
    TAM-DFJ003U
    Availability:
    Usually in stock.
    Scale:
    All Scales
    $46.75
  • Automatic polarity reverser "Hex Frog Juicer", 6 frogs

    Automatic polarity reverser "Hex Frog Juicer", 6 frogs

    Tam Valley Depot

    $104.95
    For 2A to 8A DCC systems, including NCE PowerCab.  This board can be configured to use as an automatic polarity reverser for six frogs, or a reverser for one to three reversing loops, turntables, wyes, or crossings.  Setup is simple; connect...
    SKU:
    TAM-HFJ003U
    Availability:
    Usually in stock.
    Scale:
    All Scales
    $104.95
  • Automatic polarity reverser "Mono Frog Juicer", 1 frog

    Automatic polarity reverser "Mono Frog Juicer", 1 frog

    Tam Valley Depot

    $19.50
    For all DCC systems including NCE PowerCab.  This board is an automatic polarity reverser for a single frog.  Setup is simple, connect two wires to the DCC bus and one wire to a frog.  The frog should be fully isolated.  When a train...
    SKU:
    TAM-MFJ003U
    Availability:
    Usually in stock.
    Scale:
    All Scales
    $19.50
  • Decoder, accessory "Octocoder", for "Octopus III", 8 addresses

    Decoder, accessory "Octocoder", for "Octopus III", 8 addresses

    Tam Valley Depot

    $23.34
    You can control your Octopus II or III with the Octocoder, a simple stationary DCC decoder.  The board provides connections os you can also connect fascia controllers and LEDs for local control. (Will not work with toggle switches however.) No CVs...
    SKU:
    TAM-OCD001
    Availability:
    Sold out after current stock is depleted.
    Scale:
    All Scales
    $23.34
  • Driver "Turtle", stall motor, turnout

    Driver "Turtle", stall motor, turnout

    Tam Valley Depot

    $16.32
    Includes board and mounting kit. For local control you will also need a fascia controller. For connecting to a motor the options are to use the jumper wires below, your own wires soldered to the output pins, or a servo extension cable. The MP1 motor...
    SKU:
    TAM-TURT01
    Availability:
    Sold out after current stock is depleted.
    Scale:
    All Scales
    $16.32
  • Mount, fascia controller

    Mount, fascia controller

    Tam Valley Depot

    $4.09
    Made of precision 1/8" thick laser-cut acrylic, these mounts can be used to neatly mount your fascia controllers. Simply use a 1-3/8" hole saw to place on your fascia. The four included screws hold it securely in place and the recess keeps the...
    SKU:
    TAM-MFC001
    Availability:
    Sold out after current stock is depleted.
    Scale:
    All Scales
    $4.09
  • Switch machine "SwitchWright"

    Switch machine "SwitchWright"

    Tam Valley Depot

    $16.42
    Perfect for throwing turnouts from below the table in scales from Z to O.  Based on laser cut 1/8" birch plywood for toughness and durability. Pre-assembled with a miniature servo and a 3" long 0.032" dia. wire. Will throw all hinged...
    SKU:
    TAM-SWR003
    Availability:
    Sold out after current stock is depleted.
    Scale:
    All Scales
    $16.42
  • Switch machine, micro, w/snap switch

    Switch machine, micro, w/snap switch

    Tam Valley Depot

    $14.95
    The Micro Switch Machine is a small servo-based switch machine with a built-in snap switch.  It is 1.25 inches wide and 1.5 inches tall.  It is ideal for N scale installations yet has enough torque to throw O scale turnouts.  It comes...
    SKU:
    TAM-MSW001
    Availability:
    Sold out after current stock is depleted.
    Scale:
    All Scales
    $14.95

Subscribe to our newsletter

Get the latest modelling news, store specials, and new arrivals delivered to your inbox.