Power/Controls
-
Digital Command Control (DCC)Lighting/Electrical/MotorsSound Systems/Accessories
-
Decoder, stationary, 4 switch
Digitrax, Inc.
$89.95Features: Quad switch decoder for Solenoid or Slow-motion turnouts. Configurable for Capacitive Discharge with balky solenoids. Configurable for on/off control of 8 layout lights. Plug and play wire connectorization. Works with compatible LocoNet...- SKU:
- 245-DS74
- Availability:
- Available. Current stock: 5
- Scale:
- All Scales
$89.95 -
Decoder, stationary, 4 turnouts (basic)
Digitrax, Inc.
$49.50Basic Quad Stationary Decoder for Slow Motion Turnout Machines, add cost effective DCC control to your slow motion turnouts. Features: No frills stationary decoder. Simple installation and set up. Control 4 slow motion turnout machines from your DCC...- SKU:
- 245-DS44
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$49.50 -
Decoder, stationary, servo (slow-motion turnouts)
Digitrax, Inc.
$97.95Features: Eight 9G servo decoder for 2-position Slow-motion turnouts. Configurable to control eight 3-position semaphores. Works with compatible LocoNet Systems. Plug and play connections. Option setup switches for configuration. On-layout remote...- SKU:
- 245-DS78V
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$97.95 -
Device "CurrentKeeper"
SoundTraxx
$36.75This 40mm x 6mm x 11mm DCC accessory maintains power to the decoder for up to 10 seconds during electrical interruptions. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 678-810140
- Availability:
- Available. Current stock: 4
- Scale:
- All Scales
$36.75 -
Device "CurrentKeeperII"
SoundTraxx
$36.75Not all models are made the same, and some are a TIGHT fit for a decoder installation. The CurrentKeeper is now available in two sizes to fit more models and make your installs easier! Keep more of your trains running even over dirty track and switches!...- SKU:
- 678-810160
- Availability:
- Available. Current stock: 5
- Scale:
- All Scales
$36.75 -
Diodes, remote sensing, 2 sections
Digitrax, Inc.
$13.85Eliminates the need for long runs of heavy gauge wire between the BDL168 & remotely located track sections. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-RD2
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$13.85 -
Gasket kit, 0.56" x 1.00" (x4)
SoundTraxx
$8.75Designed to mount speakers spaced enough above the speaker grille to prevent interference with the cone travel. They have peel-and-stick adhesive on both sides. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 678-810121
- Availability:
- Available. Current stock: 2
- Scale:
- All Scales
$8.75 -
Gasket kit, 16mm x 35mm (x4)
SoundTraxx
$8.95Designed to mount speakers spaced enough above the speaker grille to prevent interference with the cone travel. They have peel-and-stick adhesive on both sides. For speaker 678-810113. See the "Manufacturer" page for general delivery and...- SKU:
- 678-810138
- Availability:
- Available. Current stock: 2
- Scale:
- All Scales
$8.95 -
Gasket kit, 3/4" dia. speaker (x4)
SoundTraxx
$8.75See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 678-810118
- Availability:
- Available. Current stock: 2
- Scale:
- All Scales
$8.75 -
Harness, "MC-MH", "MC"-series 7-pin plug to NMRA 8-pin plug, medium
Train Control Systems
$7.95- SKU:
- 745-1049
- Availability:
- Sold out after current stock is depleted.
- Scale:
- All Scales
$7.95 -
Harness, "MC-SH", "MC"-series 7-pin plug to NMRA 8-pin plug, short
Train Control Systems
$7.95- SKU:
- 745-1050
- Availability:
- Sold out after current stock is depleted.
- Scale:
- All Scales
$7.95 -
Harness, "MC-VO", 7- pin plug to NMRA 8-pin plug
Train Control Systems
$9.95- SKU:
- 745-1051
- Availability:
- Will not be listed after current stock is depleted.
- Scale:
- All Scales
$9.95 -
Harness, "T-1"", "T"-series decoder to 8 pin plug, 1"
Train Control Systems
$13.75See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 745-1359
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$13.75 -
Harness, 2-pin, "CurrentKeeper"
SoundTraxx
$9.95Easily connect a CurrentKeeper or extra capacitor to any SoundTraxx decoder equipped with a 2-pin "Quick Plug" to improve performance over dirty track and switches. See the "Manufacturer" page for general delivery and pricing...- SKU:
- 678-810158
- Availability:
- Available. Current stock: 6
- Scale:
- All Scales
$9.95 -
Harness, 4-pin, 6 pairs
NCE Corp.
$14.95See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 524-309
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$14.95 -
Holder, throttle
Digitrax, Inc.
$16.25Features: Bracket will hold: DT602, UT6 and other legacy Digitrax throttles Access to LocoNet & Power Ports when stowed away. Stores throttle when not in use or when charging. Fascia mounted. Durable design. Easy to install. 90 Day...- SKU:
- 245-STOWAWAY1PACK
- Availability:
- Available. Current stock: 3
- Scale:
- All Scales
$16.25 -
Holder, throttle (x4)
Digitrax, Inc.
$51.954-pack. Features: Bracket will hold: DT602, UT6 and other legacy Digitrax throttles Access to LocoNet & Power Ports when stowed away. Stores throttle when not in use or when charging. Fascia mounted. Durable design. Easy to install. 90...- SKU:
- 245-STOWAWAY4PACK
- Availability:
- Available. Current stock: 4
- Scale:
- All Scales
$51.95 -
Interconnect board, input, for DS74
Digitrax, Inc.
$18.50Features: Input interconnect board for DS74. Provides plug and play connectivity for DS74 inputs. Supplied with ribbon cable to plug into DS74 10 pin Input header. ...- SKU:
- 245-DSXC4
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$18.50 -
Interface module, "LocoNet" to WiFi
Digitrax, Inc.
$94.95The LNWI allows you to connect compatible WiFi devices to LocoNet and run trains using compatible throttle apps. Features: Wi-Fi interface to a Digitrax LocoNet for up to four compatible mobile Wi-Fi devices and Apps Compatible with most Android and...- SKU:
- 245-LNWI
- Availability:
- Available. Current stock: 3
- Scale:
- All Scales
$94.95 -
Interface, computer, USB
NCE Corp.
$72.50For computer programming and/or operation of your Power Cab equipped layout. Requires USB cable, computer and programme. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 524-223
- Availability:
- Available. Current stock: 2
- Scale:
- All Scales
$72.50
Subscribe to our newsletter
Get the latest modelling news, store specials, and new arrivals delivered to your inbox.