Digital Command Control (DCC)
-
DCC AccessoriesDCC DecodersDCC Starter Sets
-
Decoder, function only (x4), w/integrated transponder
Digitrax, Inc.
$26.50Features: Four 125mA (250mA peak) function output for lights or other functions Functions can be turned on/off using F0-F12 Supports both 2 digit and 4 digit addressing Programmable from DCC compatible equipment Configurable Strobe feature lets you...- SKU:
- 245-TF4
- Availability:
- Available. Current stock: 2
- Scale:
- All Scales
$26.50 -
Decoder, stationary, 2 turnouts
Digitrax, Inc.
$32.25Dual Stationary Decoder for Bi-polar, Snap Switches or Slow Motion Machines Features: Simple hook up and set up. Control 2 individual turnout machines: 2 Slow motion turnout machines, such as Tortoise™ by Circuitron or Switchmaster™, OR 2...- SKU:
- 245-DS52
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$32.25 -
Decoder, stationary, 4 switch
Digitrax, Inc.
$89.95Features: Quad switch decoder for Solenoid or Slow-motion turnouts. Configurable for Capacitive Discharge with balky solenoids. Configurable for on/off control of 8 layout lights. Plug and play wire connectorization. Works with compatible LocoNet...- SKU:
- 245-DS74
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$89.95 -
Decoder, stationary, 4 turnouts (basic)
Digitrax, Inc.
$49.50Basic Quad Stationary Decoder for Slow Motion Turnout Machines, add cost effective DCC control to your slow motion turnouts. Features: No frills stationary decoder. Simple installation and set up. Control 4 slow motion turnout machines from your DCC...- SKU:
- 245-DS44
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$49.50 -
Decoder, stationary, servo (slow-motion turnouts)
Digitrax, Inc.
$97.95Features: Eight 9G servo decoder for 2-position Slow-motion turnouts. Configurable to control eight 3-position semaphores. Works with compatible LocoNet Systems. Plug and play connections. Option setup switches for configuration. On-layout remote...- SKU:
- 245-DS78V
- Availability:
- Available. Current stock: 2
- Scale:
- All Scales
$97.95 -
Device "CurrentKeeper"
SoundTraxx
$36.75This 40mm x 6mm x 11mm DCC accessory maintains power to the decoder for up to 10 seconds during electrical interruptions. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 678-810140
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$36.75 -
Device "CurrentKeeperII"
SoundTraxx
$36.75Not all models are made the same, and some are a TIGHT fit for a decoder installation. The CurrentKeeper is now available in two sizes to fit more models and make your installs easier! Keep more of your trains running even over dirty track and switches!...- SKU:
- 678-810160
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$36.75 -
Device "K2"
Train Control Systems
$36.95TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. Newly-redesigned at half the size of a KA4, the KA2 will power HO or N scale locomotives with...- SKU:
- 745-1456
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$36.95 -
Device "KA4"
Train Control Systems
$36.95The Keep-Alive™ (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. KA4 will power an HO locomotive with headlights on for approximately 6 to 20 seconds (depending on...- SKU:
- 745-1668
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$36.95 -
Device "KA4-C"
Train Control Systems
$43.95TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The KA4-C will power an HO scale locomotive with headlights on for approximately 6 to 20 seconds...- SKU:
- 745-1667
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$43.95 -
Diodes, remote sensing, 2 sections
Digitrax, Inc.
$13.85Eliminates the need for long runs of heavy gauge wire between the BDL168 & remotely located track sections. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-RD2
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$13.85 -
Harness, "MC-MH", "MC"-series 7-pin plug to NMRA 8-pin plug, medium
Train Control Systems
$7.95- SKU:
- 745-1049
- Availability:
- Sold out after current stock is depleted.
- Scale:
- All Scales
$7.95 -
Harness, "MC-SH", "MC"-series 7-pin plug to NMRA 8-pin plug, short
Train Control Systems
$7.95- SKU:
- 745-1050
- Availability:
- Sold out after current stock is depleted.
- Scale:
- All Scales
$7.95 -
Harness, "MC-VO", 7- pin plug to NMRA 8-pin plug
Train Control Systems
$9.95- SKU:
- 745-1051
- Availability:
- Will not be listed after current stock is depleted.
- Scale:
- All Scales
$9.95 -
Harness, "T-1"", "T"-series decoder to 8 pin plug, 1"
Train Control Systems
$13.75See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 745-1359
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$13.75 -
Harness, 2-pin, "CurrentKeeper"
SoundTraxx
$9.95Easily connect a CurrentKeeper or extra capacitor to any SoundTraxx decoder equipped with a 2-pin "Quick Plug" to improve performance over dirty track and switches. See the "Manufacturer" page for general delivery and pricing...- SKU:
- 678-810158
- Availability:
- Available. Current stock: 2
- Scale:
- All Scales
$9.95 -
Harness, 4-pin, 6 pairs
NCE Corp.
$14.95See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 524-309
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$14.95 -
Harness, 6-pin, 4 pairs
NCE Corp.
$14.95See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 524-311
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$14.95 -
Holder, throttle
Digitrax, Inc.
$16.25Features: Bracket will hold: DT602, UT6 and other legacy Digitrax throttles Access to LocoNet & Power Ports when stowed away. Stores throttle when not in use or when charging. Fascia mounted. Durable design. Easy to install. 90 Day...- SKU:
- 245-STOWAWAY1PACK
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$16.25 -
Holder, throttle (x4)
Digitrax, Inc.
$51.954-pack. Features: Bracket will hold: DT602, UT6 and other legacy Digitrax throttles Access to LocoNet & Power Ports when stowed away. Stores throttle when not in use or when charging. Fascia mounted. Durable design. Easy to install. 90...- SKU:
- 245-STOWAWAY4PACK
- Availability:
- Available. Current stock: 4
- Scale:
- All Scales
$51.95
Subscribe to our newsletter
Get the latest modelling news, store specials, and new arrivals delivered to your inbox.