DCC Accessories
-
Base Stations/BoostersCables/PanelsElectrical Accessories (DCC)Miscellaneous Accessories (DCC)Networks/Computer InterfacesPower SuppliesThrottlesWireless Receivers
-
"LokProgrammer"
ESU
$214.95The "LokProgrammer" is a very useful tool. It is the easiest way to program your ESU decoder. You need no programming experience, thanks to the graphic screen, everything falls into place with a few mouse clicks. Features: Change the sound...- SKU:
- 397-53452
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$214.95 -
Automatic polarity reverser "Dual Frog Juicer", 2 frogs
Tam Valley Depot
$52.50For all DCC systems including NCE PowerCab. This board can be configured to use as an automatic polarity reverser for two frogs, a reversing loop, a turntable, a wye, or a crossing. It uses the same basic design as the hex frog juicer but has...- SKU:
- TAM-DFJ003U
- Availability:
- Available. Current stock: 10
- Scale:
- All Scales
$52.50 -
Automatic polarity reverser "Hex Frog Juicer", 6 frogs
Tam Valley Depot
$117.50For 2A to 8A DCC systems, including NCE PowerCab. This board can be configured to use as an automatic polarity reverser for six frogs, or a reverser for one to three reversing loops, turntables, wyes, or crossings. Setup is simple; connect...- SKU:
- TAM-HFJ003U
- Availability:
- Available. Current stock: 12
- Scale:
- All Scales
$117.50 -
Automatic polarity reverser "Mono Frog Juicer", 1 frog
Tam Valley Depot
$21.50For all DCC systems including NCE PowerCab. This board is an automatic polarity reverser for a single frog. Setup is simple, connect two wires to the DCC bus and one wire to a frog. The frog should be fully isolated. When a train...- SKU:
- TAM-MFJ003U
- Availability:
- Available. Current stock: 13
- Scale:
- All Scales
$21.50 -
Automatic program track "Auto-Sw", for "PowerCab"
NCE Corp.
$38.95Adds a separate program track to Power Cab system. Prevents accidental programming of ALL locos on your track when using Program Track mode. Automatically disconnects your main line when in Program Track mode but does not affect Program on Main...- SKU:
- 524-226
- Availability:
- Available. Current stock: 3
- Scale:
- All Scales
$38.95 -
Automatic reverse "AR-2", w/adjustable delay
Circuitron
$72.50Same as AR-1, but with adjustable delay to hold train at sensor before reversing. Adjustable delay from one second to over one minute. Can be connected to pushbutton or DT-4 to permit stops and delays without reversing. Requires 12-18 Vdc power supply...- SKU:
- 800-5401
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$72.50 -
Battery pack "BP600MH", 600mAh, 3.6V
Digitrax, Inc.
$15.50Nickel-Metal Hydride 600mAh 3.6V rechargeable battery pack. Compatible with Digitrax throttles with 3-pin battery plug. Chargeable when inside Digitrax throttles, no need to remove the battery cover. No battery “memory” effect. Works with...- SKU:
- 245-BP600MH
- Availability:
- Available. Current stock: 4
- Scale:
- All Scales
$15.50 -
Booster board, DCC, 3A (5A trip)
Tam Valley Depot
$77.95DCC Booster board without the power supply. These boards can be used to make locomotive Power Districts or an Accessory District with a shared power supply. A jumper is used to set either Accessory Mode or Power District Mode. Each board can supply up to...- SKU:
- TAM-DAB002
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$77.95 -
Booster, add-on, "DB5", 5A
NCE Corp.
$284.95The DB5 provides 5 full amps of additional power to an SB5 Smart Booster or other 5 amp DCC system to run trains and accessories. Comes with its own international-approved power supply. See the "Manufacturer" page for general delivery and...- SKU:
- 524-28
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$284.95 -
Booster, dual, 3/5/8A, auto-reversing
Digitrax, Inc.
$279.95These new advanced boosters are designed to give you more power to run your trains. The new boosters offer 3A, 5A, or 8A of output power to better match the command station of your choice. They are available as a DB210 single booster in...- SKU:
- 245-DB220
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$279.95 -
Booster, single, 3/5/8A, auto-reversing
Digitrax, Inc.
$189.95These new advanced boosters are designed to give you more power to run your trains. The new boosters offer 3A, 5A, or 8A of output power to better match the command station of your choice. They are available as a DB210 single booster in...- SKU:
- 245-DB210
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$189.95 -
Booster, single, 3/5/8A, auto-reversing, opto-isolated
Digitrax, Inc.
$214.95These new advanced boosters are designed to give you more power to run your trains. The new boosters offer 3A, 5A, or 8A of output power to better match the command station of your choice. They are available as a DB210 single booster in...- SKU:
- 245-DB210-OPTO
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$214.95 -
Cable "RJ12-12", 12'
NCE Corp.
$11.9512' cable for UTP/DIN panel wiring. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 524-214
- Availability:
- Available. Current stock: 5
- Scale:
- All Scales
$11.95 -
Cable "RJ12-7", 7' long
NCE Corp.
$10.507' cable for UTP/DIN panel wiring. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 524-213
- Availability:
- Available. Current stock: 5
- Scale:
- All Scales
$10.50 -
Cable kit, signal driver
Digitrax, Inc.
$26.25For making 2 signal driver cables for the SE8C. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-SDCK
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$26.25 -
Cable maker kit, "LocoNet"
Digitrax, Inc.
$64.50Everything you need to make "LocoNet" cables for your layout: Crimper tool for cutting cables to length and attaching plugs to cable ends LT1 "LocoNet" tester for testing cables prior to installation on layout 50’...- SKU:
- 245-LNCMK
- Availability:
- Available. Current stock: 3
- Scale:
- All Scales
$64.50 -
Cable, "LocoNet", 16' (x2)
Digitrax, Inc.
$22.75Convenient pre-made, pre-tested cables, ready to use on your layout. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-LNC162
- Availability:
- Available. Current stock: 3
- Scale:
- All Scales
$22.75 -
Cable, "LocoNet", 50'
Digitrax, Inc.
$32.25Pre-made, pre-tested 50 foot "LocoNet" cable. Use on any "LocoNet" layout. Use for long runs or divide into custom lengths using "LocoNet" cable maker kit & RJ12 plugs. See the "Manufacturer" page for general...- SKU:
- 245-LNC501
- Availability:
- Available. Current stock: 4
- Scale:
- All Scales
$32.25 -
Cable, "LocoNet", 8' (x2)
Digitrax, Inc.
$14.50Convenient pre-made, pre-tested cables, ready to use on your layout. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-LNC82
- Availability:
- Available. Current stock: 2
- Scale:
- All Scales
$14.50 -
Command station, advanced
Digitrax, Inc.
$499.95The DCS240+ Advanced Command Station lets your LocoNet® System run up to 400 locos and 400 throttles. Full read/write programming, route capability, USB connectivity, and separate programming output lets you run and program at the same time...- SKU:
- 245-DCS240+
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$499.95
Subscribe to our newsletter
Get the latest modelling news, store specials, and new arrivals delivered to your inbox.