Tools/Finishing
-
Adhesives/Cleaners/ LubricantsPaint/FinishesTools
-
Colour set, rolling stock, 7 x 30ml bottles
Badger Air Brush Co.
$39.95One each: Engine Black, Reefer White, Reefer Gray, Reefer Yellow, Reefer Orange, Dark Tuscan Red, Light Tuscan Red. Features: • Available in 30ml plastic bottles • Made of high-quality organic pigments for superior colour retention and colour...- SKU:
- 165-1701
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$39.95 -
Colour set, weathering/offline, 7 x 30ml bottles
Badger Air Brush Co.
$39.95One each of weathered black, antique white, primer grey, concrete grey, sand, signal red, light green. Features: • Available in 30ml plastic bottles • Made of high-quality organic pigments for superior colour retention and colour fastness...- SKU:
- 165-1702
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$39.95 -
Cream, TTC, 1 oz. bottle
Rapido Trains Inc.
$7.95"Our new acrylic paint is colour-matched to real paint chips for the most accurate colours possible. All our railway paints dry to a decal-ready gloss finish and our weathering shades dry to a flat finish. All our paint is manufactured for us right...- SKU:
- 606-330044
- Availability:
- Sold out after current stock is depleted.
- Roadname:
- TTC
- Scale:
- All Scales
$7.95 -
Cutter, engraving, large (3/32" shank)
Miscellaneous
MSRP: $3.64$3.25Manufactured by Dremel.Quality cutters for detail engraving, carving, routing in wood, fiberglass, plastic and soft metals. Not for use with hardened materials.- SKU:
- 250-113
- Availability:
- Sold out after current stock is depleted.
- Scale:
- All Scales
MSRP: $3.64$3.25 -
Cutter, engraving, medium (3/32" shank)
Miscellaneous
MSRP: $3.64$3.25Manufactured by Dremel.Quality cutters for detail engraving, carving, routing in wood, fiberglass, plastic and soft metals. Not for use with hardened materials.- SKU:
- 250-106
- Availability:
- Sold out after current stock is depleted.
- Scale:
- All Scales
MSRP: $3.64$3.25 -
Cutter, engraving, small (3/32" shank)
Miscellaneous
MSRP: $3.84$3.25Manufactured by Dremel.Quality cutters for detail engraving, carving, routing in wood, fiberglass, plastic and soft metals. Not for use with hardened materials.- SKU:
- 250-105
- Availability:
- Sold out after current stock is depleted.
- Scale:
- All Scales
MSRP: $3.84$3.25 -
Cutter, hot wire, for foam
Woodland Scenics Co.
$55.50The Hot Wire Foam Cutter makes clean, precise cuts, adjusts for angled cuts and cuts a path 4.5 in wide x 6 in deep (11.4 cm x 15.2 cm). Cutter heats instantly and leaves no mess. Use straight-rod option to cut in tight places and for faster cuts...- SKU:
- 785-1435
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$55.50 -
Cutter, rail, heavy duty
Micro Engineering
$28.95For cutting rail up to and including Code 100. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 255-48101
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$28.95 -
Cutter, rail, light duty
Micro Engineering
$20.95For cutting rail up to and including Code 70. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 255-48102
- Availability:
- Available. Current stock: 3
- Scale:
- All Scales
$20.95 -
Cutter, sprue, small plastic parts
Miscellaneous
MSRP: $16.54$14.95Distributed by B&B Hobby Supplies. Designed to cleanly cut small or delicate plastic parts from the sprue or runner. They virtually eliminate the chances of breaking plastic parts. Only the quantity shown in stock is currently available.- SKU:
- MIS-BBT1015
- Availability:
- Sold out after current stock is depleted.
- Scale:
- All Scales
MSRP: $16.54$14.95 -
Cutter, sprue/wire
Mascot Precision Tools
$19.95Features hardened, slim-line, razor sharp jaws, cushion grips and is perfect for cutting sprue cleanly. Can also cut wire up to 1 mm. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 230-450
- Availability:
- Available. Current stock: 2
- Scale:
- All Scales
$19.95 -
Decal coat "Micro Flat", 1 oz. bottle
Microscale Industries Inc.
$6.08The Micro Coat finishes are more than just a pretty look. This is one tough finish and a real breakthrough in a modern formulation of water reducible acrylic resin. For models that get a lot of handling this is the answer. See the "Manufacturer" page for...- SKU:
- 460-MI-3
- Availability:
- Available. Current stock: 2
- Scale:
- All Scales
$6.08 -
Decal coat "Micro Gloss", 1 oz. bottle
Microscale Industries Inc.
$6.08The Micro Coat Gloss finish is more than just a pretty look. This is one tough finish and a real breakthrough in a modern formulation of water reducible acrylic resin. For models that get a lot of handling this is the answer. See the "Manufacturer" page...- SKU:
- 460-MI-4
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$6.08 -
Decal coat "Micro Satin", 1 oz. bottle
Microscale Industries Inc.
$6.08The Micro Coat Satin finish is more than just a pretty look. This is one tough finish and a real breakthrough in a modern formulation of water reducible acrylic resin. For models that get a lot of handling this is the answer. See the "Manufacturer" page...- SKU:
- 460-MI-5
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$6.08 -
Die, 0-80
K and S Engineering
$10.95High speed steel, 13/16" diameter dies, with unified threads. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 370-415
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$10.95 -
Die, 0-80.
Woodland Scenics Co.
$66.75See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 785-878
- Availability:
- Will be backordered if not in stock.
- Scale:
- All Scales
$66.75 -
Die, 00-90
Woodland Scenics Co.
$66.75See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 785-877
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$66.75 -
Die, 1-72
K and S Engineering
$10.95High speed steel, 13/16" diameter dies, with unified threads. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 370-416
- Availability:
- Will be backordered if not in stock.
- Scale:
- All Scales
$10.95 -
Die, 1-72.
Woodland Scenics Co.
$66.75See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 785-879
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$66.75 -
Die, 2-56.
Woodland Scenics Co.
$66.75See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 785-880
- Availability:
- Will be backordered if not in stock.
- Scale:
- All Scales
$66.75
Subscribe to our newsletter
Get the latest modelling news, store specials, and new arrivals delivered to your inbox.