MSRP:
Now:
$127.62
Was:
— You save
Frequently bought together:
Description
Features:
- Fully connectorized installation.
- Optional support for DCC 9-Aspect control mode, including Lunars.
- Easy setup with Option Switches and LocoNet programming.
- Configurable for four solenoid or four slow-motion turnout control.
- 8 Input lines for local control and sensors.
- 8 System routes with 8 entries each.
- Advanced LocoNet configuration capability with Series7 style installation support using a DT602.
See the "Manufacturer" page for general delivery and pricing information.
Related Products

Wand, for use with "SoundCar" decoder
SoundTraxx
MSRP:
Now:
$11.75
Was:
Featuring a high-powered magnet, this tool is perfect for waving over "SoundCar"-equipped models to activate Intelligent Consisting. Measures 5.5” long. See the "Manufacturer" page for general...
- SKU:
- 678-810141
- Availability:
- Will be backordered if not in stock.
- Scale:
- All Scales

Tester, decoder/"LocoNet" cable
Digitrax, Inc.
MSRP:
Now:
$6.44
Was:
It consists of a harness with 6 conductor Telco type wire with a male plug, a tester with a female 6 conductor jack, and a 100 Ohm 2 watt protection resistor. See the "Manufacturer" page for general...
- SKU:
- 245-LT1
- Availability:
- Will be backordered if not in stock.
- Scale:
- All Scales

Decoder, stationary, 4 switch
Digitrax, Inc.
MSRP:
Now:
$84.73
Was:
Features: Quad switch decoder for Solenoid or Slow-motion turnouts. Configurable for Capacitive Discharge with balky solenoids. Configurable for on/off control of 8 layout lights. Plug and play wire...
- SKU:
- 245-DS74
- Availability:
- Normally kept in stock but may be backordered.
- Scale:
- All Scales

Decoder, stationary, 2 turnouts
Digitrax, Inc.
MSRP:
Now:
$29.95
Was:
Dual Stationary Decoder for Bi-polar, Snap Switches or Slow Motion Machines Features: Simple hook up and set up. Control 2 individual turnout machines: 2 Slow motion turnout machines, such as...
- SKU:
- 245-DS52
- Availability:
- Will be backordered if not in stock.
- Scale:
- All Scales

Test kit, decoder
SoundTraxx
MSRP:
$3.28
Now:
$2.50
Was:
- SKU:
- 678-829001
- Availability:
- Sold out after current stock is depleted.
- Scale:
- All Scales
Customers Also Viewed

Command station, advanced
Digitrax, Inc.
MSRP:
Now:
$454.95
Was:
The DCS240+ Advanced Command Station lets your LocoNet® System run up to 400 locos and 400 throttles. Full read/write programming, route capability, USB connectivity, and separate programming...
- SKU:
- 245-DCS240+
- Availability:
- Usually in stock.
- Scale:
- All Scales

Lubricant, motor bearing, 0.5 oz.
Atlas Model Railroad Co.
MSRP:
Now:
$18.67
Was:
Perfect for all locomotives. Motor bearing, heavy duty lubricant (.5 oz) See the "Manufacturer" page for general delivery and pricing information.
- SKU:
- 150-191
- Availability:
- Will be backordered if not in stock.
- Scale:
- All Scales

Locomotive, diesel, MLW RS-18u, CP #1837, no Multimark - DCC/sound
Rapido Trains Inc.
MSRP:
Now:
$314.95
Was:
Features:-
Accurately designed using our 3D scan of a real RS–18 and measurements from an active RS–18u Completely redesigned chassis and shell for...
- SKU:
- 606-32567
- Availability:
- Pre-order only. You may be charged a deposit.
- Scale:
- HO
- Roadname:
- CP

Cement, ballast, dry, 9 cu. in. bag
Woodland Scenics Co.
MSRP:
$4.61
Now:
$2.95
Was:
- SKU:
- 785-91
- Availability:
- Sold out after current stock is depleted.
- Scale:
- All Scales

Decal, grain elevator, Saskatchewan Pool, 1958-1965
Black Cat Publishing
MSRP:
Now:
$9.50
Was:
Waterslide decal. Each set will completely letter one elevator. See the "Manufacturer" page for delivery and pricing information.
- SKU:
- BLA-SASK901
- Availability:
- Will be backordered if not in stock.
- Scale:
- HO

Switch machine (x6)
Rapido Trains Inc.
MSRP:
Now:
$114.95
Was:
The "RailCrew" series of products.Six-pack.Features: Easy to install on existing layouts Museum-quality switch stands with rotating targets Racor 17B (tall), 31B (tall) and 20C (low) switch...
- SKU:
- 606-320102
- Availability:
- Usually in stock.
- Scale:
- HO

Decal, C40-8W, CN (IC)/LMSX Leasing
Highball Graphics
MSRP:
Now:
$10.53
Was:
Waterslide decal. This set will do three complete models. See the "Manufacturer" page for general delivery and pricing information.
- SKU:
- HIG-L-164
- Availability:
- Will be backordered if not in stock.
- Scale:
- HO
- Roadname:
- CN

Decal, signs, advertising and railway, assorted
Woodland Scenics Co.
MSRP:
Now:
$9.64
Was:
Dry transfer decals. Full colour designs to add detail and realism to buildings, fences and signs. See the "Manufacturer" page for general delivery and pricing information.
- SKU:
- 785-245
- Availability:
- Will be backordered if not in stock.
- Scale:
- HO

Decal, grain elevator, Saskatchewan Pool, 1940-1959
Black Cat Publishing
MSRP:
Now:
$9.50
Was:
Waterslide decal. Each set will completely letter one elevator. See the "Manufacturer" page for delivery and pricing information.
- SKU:
- BLA-SASK904
- Availability:
- Will be backordered if not in stock.
- Scale:
- HO

Steps, GP, SD (x4)
Miniatures By Eric
MSRP:
Now:
$11.50
Was:
Cast brass parts.See the "Manufacturer" page for general delivery and pricing information.
- SKU:
- MIN-S17
- Availability:
- Will be backordered if not in stock.
- Scale:
- HO