Digital Command Control (DCC)
-
DCC AccessoriesDCC Starter SetsDecoders
-
"LokProgrammer"
ESU
$214.95The "LokProgrammer" is a very useful tool. It is the easiest way to program your ESU decoder. You need no programming experience, thanks to the graphic screen, everything falls into place with a few mouse clicks. Features: Change the sound...- SKU:
- 397-53452
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$214.95 -
"Soundbug" module, sound, plug n'play, pre-loaded
Digitrax, Inc.
$66.50For DH165xx decoders and others. Preloaded with eight selectable steam and diesel sound schemes. Includes 8 ohm, 16mm x 16mm x 9mm box speaker and 330uF capacitor. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-SFX006
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$66.50 -
Adapter board, 21MTC, wired interface
ESU
$12.50The 21MTC Adaptor Board is for adding a 21MTC interface by hard-wiring into a non-DCC ready locomotive. With its compact dimensions of 27mm x 17mm it is almost the same size as the decoder and is also equipped with an extra mounting lug that can be...- SKU:
- 397-51967
- Availability:
- Available. Current stock: 4
- Scale:
- All Scales
$12.50 -
Adapter kit, JST to Next18
SoundTraxx
$20.95This adapter allows you to use our smallest decoder (The TSU-N18) in practically any N-scale model! Bring the TSU-N18's 6 functions plus a narrower profile to your models. The JST-Next18 Adapter features a Next18 socket to simply plug-in your TSU-N18...- SKU:
- 678-810163
- Availability:
- Available. Current stock: 2
- Scale:
- N
$20.95 -
Adapter, 9-pin socket to 21-pin plug
SoundTraxx
$18.95Easily adapt any SoundTraxx 21PNEM decoder to an NMRA 9-Pin DCC "quick plug" equipped model. It can also be used with a SoundTraxx 9-Pin JST Power Harness (678-810069) to create a universal-style decoder. Supports up to 8 lighting functions and...- SKU:
- 678-810159
- Availability:
- Available. Current stock: 0
- Scale:
- HO
$18.95 -
Automatic polarity reverser "Dual Frog Juicer", 2 frogs
Tam Valley Depot
$52.50For all DCC systems including NCE PowerCab. This board can be configured to use as an automatic polarity reverser for two frogs, a reversing loop, a turntable, a wye, or a crossing. It uses the same basic design as the hex frog juicer but has...- SKU:
- TAM-DFJ003U
- Availability:
- Available. Current stock: 10
- Scale:
- All Scales
$52.50 -
Automatic polarity reverser "Hex Frog Juicer", 6 frogs
Tam Valley Depot
$117.50For 2A to 8A DCC systems, including NCE PowerCab. This board can be configured to use as an automatic polarity reverser for six frogs, or a reverser for one to three reversing loops, turntables, wyes, or crossings. Setup is simple; connect...- SKU:
- TAM-HFJ003U
- Availability:
- Available. Current stock: 12
- Scale:
- All Scales
$117.50 -
Automatic polarity reverser "Mono Frog Juicer", 1 frog
Tam Valley Depot
$21.50For all DCC systems including NCE PowerCab. This board is an automatic polarity reverser for a single frog. Setup is simple, connect two wires to the DCC bus and one wire to a frog. The frog should be fully isolated. When a train...- SKU:
- TAM-MFJ003U
- Availability:
- Available. Current stock: 13
- Scale:
- All Scales
$21.50 -
Automatic program track "Auto-Sw", for "PowerCab"
NCE Corp.
$38.95Adds a separate program track to Power Cab system. Prevents accidental programming of ALL locos on your track when using Program Track mode. Automatically disconnects your main line when in Program Track mode but does not affect Program on Main...- SKU:
- 524-226
- Availability:
- Available. Current stock: 3
- Scale:
- All Scales
$38.95 -
Automatic reverse "AR-2", w/adjustable delay
Circuitron
$72.50Same as AR-1, but with adjustable delay to hold train at sensor before reversing. Adjustable delay from one second to over one minute. Can be connected to pushbutton or DT-4 to permit stops and delays without reversing. Requires 12-18 Vdc power supply...- SKU:
- 800-5401
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$72.50 -
Base kit, signal mast (x3)
Digitrax, Inc.
$20.25Can be used as signal mast bases in any scale, or painted and detailed as N-scale signal masts. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-SMBK
- Availability:
- Available. Current stock: 0
- Scale:
- HO
$20.25 -
Battery pack "BP600MH", 600mAh, 3.6V
Digitrax, Inc.
$15.50Nickel-Metal Hydride 600mAh 3.6V rechargeable battery pack. Compatible with Digitrax throttles with 3-pin battery plug. Chargeable when inside Digitrax throttles, no need to remove the battery cover. No battery “memory” effect. Works with...- SKU:
- 245-BP600MH
- Availability:
- Available. Current stock: 4
- Scale:
- All Scales
$15.50 -
Booster board, DCC, 3A (5A trip)
Tam Valley Depot
$77.95DCC Booster board without the power supply. These boards can be used to make locomotive Power Districts or an Accessory District with a shared power supply. A jumper is used to set either Accessory Mode or Power District Mode. Each board can supply up to...- SKU:
- TAM-DAB002
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$77.95 -
Booster, add-on, "DB5", 5A
NCE Corp.
$284.95The DB5 provides 5 full amps of additional power to an SB5 Smart Booster or other 5 amp DCC system to run trains and accessories. Comes with its own international-approved power supply. See the "Manufacturer" page for general delivery and...- SKU:
- 524-28
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$284.95 -
Booster, dual, 3/5/8A, auto-reversing
Digitrax, Inc.
$279.95These new advanced boosters are designed to give you more power to run your trains. The new boosters offer 3A, 5A, or 8A of output power to better match the command station of your choice. They are available as a DB210 single booster in...- SKU:
- 245-DB220
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$279.95 -
Booster, single, 3/5/8A, auto-reversing
Digitrax, Inc.
$189.95These new advanced boosters are designed to give you more power to run your trains. The new boosters offer 3A, 5A, or 8A of output power to better match the command station of your choice. They are available as a DB210 single booster in...- SKU:
- 245-DB210
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$189.95 -
Booster, single, 3/5/8A, auto-reversing, opto-isolated
Digitrax, Inc.
$214.95These new advanced boosters are designed to give you more power to run your trains. The new boosters offer 3A, 5A, or 8A of output power to better match the command station of your choice. They are available as a DB210 single booster in...- SKU:
- 245-DB210-OPTO
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$214.95 -
Cable "RJ12-12", 12'
NCE Corp.
$11.9512' cable for UTP/DIN panel wiring. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 524-214
- Availability:
- Available. Current stock: 5
- Scale:
- All Scales
$11.95 -
Cable "RJ12-7", 7' long
NCE Corp.
$10.507' cable for UTP/DIN panel wiring. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 524-213
- Availability:
- Available. Current stock: 5
- Scale:
- All Scales
$10.50 -
Cable kit, signal driver
Digitrax, Inc.
$26.25For making 2 signal driver cables for the SE8C. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-SDCK
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$26.25
Subscribe to our newsletter
Get the latest modelling news, store specials, and new arrivals delivered to your inbox.