DCC Accessories
-
Base Stations/BoostersCables/PanelsElectrical Accessories (DCC)Miscellaneous Accessories (DCC)Networks/Computer InterfacesPower SuppliesThrottlesWireless Receivers
-
Cable, "LocoNet", 8' (x2)
Digitrax, Inc.
$13.95Convenient pre-made, pre-tested cables, ready to use on your layout. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-LNC82
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$13.95 -
Command station, advanced
Digitrax, Inc.
$479.95The DCS240+ Advanced Command Station lets your LocoNet® System run up to 400 locos and 400 throttles. Full read/write programming, route capability, USB connectivity, and separate programming output lets you run and program at the same time...- SKU:
- 245-DCS240+
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$479.95 -
Connector, edge (x3)
Digitrax, Inc.
$13.95For use with PM4 series boards, BDL16 series boards and SE8 series boards. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-CARDEDGE
- Availability:
- Available. Current stock: 4
- Scale:
- All Scales
$13.95 -
Controller, auto reversing, one reversing district
Digitrax, Inc.
$37.95Features: Cost effective automatic reversing for one reversing section or subdistrict User selectable trip current lets you adjust the AR1 to work with any scale or equipment on your layout Auto-Reversing manages polarity mismatches on the reversing...- SKU:
- 245-AR1
- Availability:
- Available. Current stock: 4
- Scale:
- All Scales
$37.95 -
Cord, coiled, plus modular adaptor (RJ12)
Digitrax, Inc.
$20.75Add a coiled cord to your "LocoNet" throttle without soldering! Just plug the modular adapter provided on to your existing throttle plug and add the coiled cord. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-LNCCMC1
- Availability:
- Available. Current stock: 3
- Scale:
- All Scales
$20.75 -
Diodes, remote sensing, 2 sections
Digitrax, Inc.
$13.85Eliminates the need for long runs of heavy gauge wire between the BDL168 & remotely located track sections. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-RD2
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$13.85 -
Hardware kit, signal mounting
Digitrax, Inc.
$13.85Holds your signal plugs at just the right distance from the layout to make it easy to plug in your signals. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-SMHK
- Availability:
- Available. Current stock: 0
- Scale:
- HO
$13.85 -
Holder, throttle
Digitrax, Inc.
$16.25Features: Bracket will hold: DT602, UT6 and other legacy Digitrax throttles Access to LocoNet & Power Ports when stowed away. Stores throttle when not in use or when charging. Fascia mounted. Durable design. Easy to install. 90 Day...- SKU:
- 245-STOWAWAY1PACK
- Availability:
- Available. Current stock: 3
- Scale:
- All Scales
$16.25 -
Holder, throttle (x4)
Digitrax, Inc.
$51.954-pack. Features: Bracket will hold: DT602, UT6 and other legacy Digitrax throttles Access to LocoNet & Power Ports when stowed away. Stores throttle when not in use or when charging. Fascia mounted. Durable design. Easy to install. 90...- SKU:
- 245-STOWAWAY4PACK
- Availability:
- Available. Current stock: 3
- Scale:
- All Scales
$51.95 -
Interface module, "LocoNet" to WiFi
Digitrax, Inc.
$94.95The LNWI allows you to connect compatible WiFi devices to LocoNet and run trains using compatible throttle apps. Features: Wi-Fi interface to a Digitrax LocoNet for up to four compatible mobile Wi-Fi devices and Apps Compatible with most Android and...- SKU:
- 245-LNWI
- Availability:
- Available. Current stock: 5
- Scale:
- All Scales
$94.95 -
Interface, computer, USB
NCE Corp.
$72.50For computer programming and/or operation of your Power Cab equipped layout. Requires USB cable, computer and programme. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 524-223
- Availability:
- Available. Current stock: 2
- Scale:
- All Scales
$72.50 -
Modular adaptor (RJ12) (x3)
Digitrax, Inc.
$13.95Use for joining "LocoNet" cables, adding coiled cords to throttles, etc. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-LNMC3
- Availability:
- Available. Current stock: 3
- Scale:
- All Scales
$13.95 -
Mounting kit, terminal strip
Digitrax, Inc.
$19.50Each terminal strip board can handle from 1 to 4 signal heads. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-TSMK
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$19.50 -
Noise suppressor "Snubber", track bus (x2)
NCE Corp.
$17.75The NCE "Snubber" DCC track bus noise suppressor reduces or eliminates voltage spikes on long runs of DCC bus wire. This is especially important on any DCC track bus wire 40 feet or longer. It protects decoders from damaging inductive voltage...- SKU:
- 524-305
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$17.75 -
Occupancy detector, "LocoNet", 16 sections
Digitrax, Inc.
$174.95The BDL168 is a cost effective LocoNet Occupancy Detector for 16 detection sections. It lets you know when detection sections of your layout are occupied. When used in conjunction with one or two RX4 transponder detectors it operates up to 8 transponding...- SKU:
- 245-BDL168
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$174.95 -
Occupancy detector, "LocoNet", 4 sections
Digitrax, Inc.
$42.75Features: Low-cost, High-sensitivity DCC block-occupancy detection. Adjustable resistance/current detection section (DS) trip threshold. 8A capacity, suitable for all scales and track wiring configurations. Noise resistant and...- SKU:
- 245-BD4N
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$42.75 -
Occupancy detector, "LocoNet", 8 sections
Digitrax, Inc.
$204.95BXP88 makes adding detection and transponding to your layout easier than ever. No more complicated wiring! Features: DCC Occupancy Detection supports up to 8 detection sections letting you know when equipped rolling stock is in a detection...- SKU:
- 245-BXP88
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$204.95 -
Occupancy detector/auto reverser/power manager
Digitrax, Inc.
$56.50The BXPA1 is a combination DCC auto-reverser, occupancy detector, transponding detector and intelligent power manager. It is designed to make transponding implementation easy and provide advanced DCC track management by communicating all state...- SKU:
- 245-BXPA1
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$56.50 -
Panel "PCP"
NCE Corp.
$33.25Add a separate PCP panel to operate your Power Cab in other places or on other layouts. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 524-222
- Availability:
- Available. Current stock: 2
- Scale:
- All Scales
$33.25 -
Panel "UTP"
NCE Corp.
$33.25Cab bus panel. All four RJ-12 jacks are wired in parallel for easy plug 'n play use. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 524-207
- Availability:
- Available. Current stock: 4
- Scale:
- All Scales
$33.25
Subscribe to our newsletter
Get the latest modelling news, store specials, and new arrivals delivered to your inbox.