Decoders
-
Capacitor DevicesDecoder AccessoriesDecoders (Control/Function)Decoders (Control/Function/Sound)Decoders (Function Only)Decoders (Lighting)Decoders (Sound Only)Decoders (Stationary)
-
Harness, Soundtraxx JST to 8 pin, NMRA plug
SoundTraxx
$15.50This harness easily converts TSU-1000 Digital Sound Decoders to plug and play decoders for use with models equipped with an NMRA 8-pin socket. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 678-810135
- Availability:
- Available. Current stock: 7
- Scale:
- HO
$15.50 -
Interconnect board, input, for DS74
Digitrax, Inc.
$18.50Features: Input interconnect board for DS74. Provides plug and play connectivity for DS74 inputs. Supplied with ribbon cable to plug into DS74 10 pin Input header. ...- SKU:
- 245-DSXC4
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$18.50 -
Plug "21-HW-Male", European hardware, 21-pin (x5)
Train Control Systems
$34.50The 21-HW-Male is a circuit board with a 21-pin NEM660 (MTC21) connector and solder pads to connect wires. The male 21-pin socket may be used with any 21-pin decoder such as the WOW121 or EU621. The decoder can then be hardwired directly to your...- SKU:
- 745-1653
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$34.50 -
Plug, Digitrax 9 pin (x5)
Digitrax, Inc.
$25.50Replaces 9 pin plug-equipped decoder for DC operation of locomotive. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-DHDP
- Availability:
- Available. Current stock: 1
- Scale:
- HO
$25.50 -
Plug, Digitrax 9 pin (x5) (N)
Digitrax, Inc.
$25.50Replaces 9 pin plug-equipped decoder for DC operation of locomotive. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-DNDP
- Availability:
- Available. Current stock: 0
- Scale:
- N
$25.50 -
Plug, extension, 9-pin JST (x5)
Train Control Systems
$41.259-Pin JST female extension plug. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 745-1345
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$41.25 -
Plug, extension, NMRA, 8 pin
Train Control Systems
$6.95An extension plug for the NMRA 8-pin connector. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 745-1253
- Availability:
- Available. Current stock: 7
- Scale:
- All Scales
$6.95 -
Plug, NMRA, 8 pin
Train Control Systems
$6.958 pin NMRA plug, pre-made and ready for wires to be soldered on from a decoder, etc. Can be plugged into any locomotive with an 8-pin connector. NOTE: This product does not include wires. See the "Manufacturer" page for general delivery and pricing...- SKU:
- 745-1254
- Availability:
- Available. Current stock: 7
- Scale:
- All Scales
$6.95 -
Socket, 9-pin JST (x5)
Train Control Systems
$27.95The 9-Pin JST female socket may be used in conjunction with a 9-pin JST male harness. The board has 9 solder pads for easy wiring to locomotive components or a decoder. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 745-1374
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$27.95 -
Sound file, LokSound 5 family
ESU
$12.00ESU LokSound 5 sound file - identified as "Article number Sxxx" Please enter the sound file number required to be installed in the comments section of your order. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 397-Sxxxx
- Availability:
- Available.
- Scale:
- HO
$12.00 -
Test kit, decoder
SoundTraxx
MSRP: $3.28$2.50- SKU:
- 678-829001
- Availability:
- Sold out after current stock is depleted.
- Scale:
- All Scales
MSRP: $3.28$2.50 -
Tester, decoder
ESU
$63.50Decoders without any interface can be contacted with individual terminals. A quality coreless motor with flywheel serves in conjunction with LEDs indicating the direction for checking the motor output. Thus it is quite easy to check on the low speed...- SKU:
- 397-53900
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$63.50 -
Tester, decoder/"LocoNet" cable
Digitrax, Inc.
$6.95It consists of a harness with 6 conductor Telco type wire with a male plug, a tester with a female 6 conductor jack, and a 100 Ohm 2 watt protection resistor. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-LT1
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$6.95 -
Wire, decoder, 30 AWG, black, 20'
Train Control Systems
$18.5020 foot lengths of 32 gauge wire. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 745-1219
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$18.50 -
Wire, decoder, 30 AWG, stranded
Digitrax, Inc.
$19.75For decoder, lighting and signal installation. 10' lengths in 9 colours. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-DECODERWIRE
- Availability:
- Available. Current stock: 2
- Scale:
- All Scales
$19.75 -
Wire, decoder, ultra-flexible, 30 AWG, black, 10'
SoundTraxx
$9.95Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze. We offer 11 colours to match the NMRA and SoundTraxx standards. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 678-810142
- Availability:
- Available. Current stock: 2
- Scale:
- All Scales
$9.95 -
Wire, thin (0.5mm o/d), 36 AWG, black, 10m length
ESU
$6.25"Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer...- SKU:
- 397-51942
- Availability:
- Available. Current stock: 3
- Scale:
- All Scales
$6.25 -
Wire, thin (0.5mm o/d), 36 AWG, blue, 10m length
ESU
$6.25"Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer...- SKU:
- 397-51949
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$6.25 -
Wire, thin (0.5mm o/d), 36 AWG, grey, 10m length
ESU
$6.25"Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer...- SKU:
- 397-51946
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$6.25 -
Wire, thin (0.5mm o/d), 36 AWG, orange, 10m length
ESU
$6.25"Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer...- SKU:
- 397-51944
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$6.25
Subscribe to our newsletter
Get the latest modelling news, store specials, and new arrivals delivered to your inbox.