Digital Command Control (DCC)
-
DCC AccessoriesDCC DecodersDCC Starter Sets
-
"LokProgrammer"
ESU
MSRP: $209.95$199.95The "LokProgrammer" is a very useful tool. It is the easiest way to program your ESU decoder. You need no programming experience, thanks to the graphic screen, everything falls into place with a few mouse clicks. Features: Change the sound...- SKU:
- 397-53452
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
MSRP: $209.95$199.95 -
"Soundbug" module, sound, plug n'play, pre-loaded
Digitrax, Inc.
$59.95For DH165xx decoders and others. Preloaded with eight selectable steam and diesel sound schemes. Includes 8 ohm, 16mm x 16mm x 9mm box speaker and 330uF capacitor. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-SFX006
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$59.95 -
Adapter board, 21MTC, wired interface
ESU
$12.50The 21MTC Adaptor Board is for adding a 21MTC interface by hard-wiring into a non-DCC ready locomotive. With its compact dimensions of 27mm x 17mm it is almost the same size as the decoder and is also equipped with an extra mounting lug that can be...- SKU:
- 397-51967
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$12.50 -
Automatic polarity reverser "Dual Frog Juicer", 2 frogs
Tam Valley Depot
$49.95For all DCC systems including NCE PowerCab. This board can be configured to use as an automatic polarity reverser for two frogs, a reversing loop, a turntable, a wye, or a crossing. It uses the same basic design as the hex frog juicer but has...- SKU:
- TAM-DFJ003U
- Availability:
- Available. Current stock: 5
- Scale:
- All Scales
$49.95 -
Automatic polarity reverser "Hex Frog Juicer", 6 frogs
Tam Valley Depot
$112.50For 2A to 8A DCC systems, including NCE PowerCab. This board can be configured to use as an automatic polarity reverser for six frogs, or a reverser for one to three reversing loops, turntables, wyes, or crossings. Setup is simple; connect...- SKU:
- TAM-HFJ003U
- Availability:
- Available. Current stock: 12
- Scale:
- All Scales
$112.50 -
Automatic polarity reverser "Mono Frog Juicer", 1 frog
Tam Valley Depot
$20.75For all DCC systems including NCE PowerCab. This board is an automatic polarity reverser for a single frog. Setup is simple, connect two wires to the DCC bus and one wire to a frog. The frog should be fully isolated. When a train...- SKU:
- TAM-MFJ003U
- Availability:
- Available. Current stock: 6
- Scale:
- All Scales
$20.75 -
Automatic program track "Auto-Sw", for "PowerCab"
NCE Corp.
$36.95Adds a separate program track to Power Cab system. Prevents accidental programming of ALL locos on your track when using Program Track mode. Automatically disconnects your main line when in Program Track mode but does not affect Program on Main...- SKU:
- 524-226
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$36.95 -
Automatic reverse "AR-2", w/adjustable delay
Circuitron
$72.50Same as AR-1, but with adjustable delay to hold train at sensor before reversing. Adjustable delay from one second to over one minute. Can be connected to pushbutton or DT-4 to permit stops and delays without reversing. Requires 12-18 Vdc power supply...- SKU:
- 800-5401
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$72.50 -
Automatic reverser "AR10", with circuit breaker
NCE Corp.
$77.95The AR10 is an automatic reverse loop controller for DCC layouts. It requires just 4 connections, two to the main line and two to the loop. In addition it functions as a circuit breaker for the reverse loop. Recommended for DCC systems from 1A to 10A...- SKU:
- 524-233
- Availability:
- Available. Current stock: 2
- Scale:
- All Scales
$77.95 -
Battery pack "BP600MH", 600mAh, 3.6V
Digitrax, Inc.
$14.95Nickel-Metal Hydride 600mAh 3.6V rechargeable battery pack. Compatible with Digitrax throttles with 3-pin battery plug. Chargeable when inside Digitrax throttles, no need to remove the battery cover. No battery “memory” effect. Works with...- SKU:
- 245-BP600MH
- Availability:
- Available. Current stock: 6
- Scale:
- All Scales
$14.95 -
Booster, "PB5", 5A
NCE Corp.
$289.95Continuous 5 Amp booster that can add to your existing DCC system. Includes power supply. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 524-45
- Availability:
- Will be backordered if not in stock.
- Scale:
- All Scales
$289.95 -
Booster, dual, 3/5/8A, auto-reversing
Digitrax, Inc.
$269.95These new advanced boosters are designed to give you more power to run your trains. The new boosters offer 3A, 5A, or 8A of output power to better match the command station of your choice. They are available as a DB210 single booster in...- SKU:
- 245-DB220
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$269.95 -
Booster, PTB-100, for programming track
SoundTraxx
$81.25Raises the programming track output for reliable programming of decoders without degrading the DCC signal. See the "Manufacturer" page for general delivery and pricing information. NOTE: This item is about to be discontinued so please order a.s.a.p. if...- SKU:
- 678-829002
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$81.25 -
Booster, single, 3/5/8A, auto-reversing
Digitrax, Inc.
$179.95These new advanced boosters are designed to give you more power to run your trains. The new boosters offer 3A, 5A, or 8A of output power to better match the command station of your choice. They are available as a DB210 single booster in...- SKU:
- 245-DB210
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$179.95 -
Booster, single, 3/5/8A, auto-reversing, opto-isolated
Digitrax, Inc.
$204.95These new advanced boosters are designed to give you more power to run your trains. The new boosters offer 3A, 5A, or 8A of output power to better match the command station of your choice. They are available as a DB210 single booster in...- SKU:
- 245-DB210-OPTO
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$204.95 -
Cable "RJ12-12", 12'
NCE Corp.
$11.1512' cable for UTP/DIN panel wiring. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 524-214
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$11.15 -
Cable "RJ12-7", 7' long
NCE Corp.
$9.957' cable for UTP/DIN panel wiring. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 524-213
- Availability:
- Available. Current stock: 5
- Scale:
- All Scales
$9.95 -
Cable kit, signal driver
Digitrax, Inc.
$25.25For making 2 signal driver cables for the SE8C. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-SDCK
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$25.25 -
Cable maker kit, "LocoNet"
Digitrax, Inc.
$62.50Everything you need to make "LocoNet" cables for your layout: Crimper tool for cutting cables to length and attaching plugs to cable ends LT1 "LocoNet" tester for testing cables prior to installation on layout 50’...- SKU:
- 245-LNCMK
- Availability:
- Available. Current stock: 3
- Scale:
- All Scales
$62.50 -
Cable, "LocoNet", 16' (x2)
Digitrax, Inc.
$21.95Convenient pre-made, pre-tested cables, ready to use on your layout. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-LNC162
- Availability:
- Available. Current stock: 3
- Scale:
- All Scales
$21.95
Subscribe to our newsletter
Get the latest modelling news, store specials, and new arrivals delivered to your inbox.