DCC Decoders
-
Capacitor DevicesDecoder AccessoriesDecoders (Control/Function)Decoders (Control/Function/Sound)Decoders (Function Only)Decoders (Lighting)Decoders (Sound Only)Decoders (Stationary)
-
Decoder, stationary, servo (slow-motion turnouts)
Digitrax, Inc.
$97.95Features: Eight 9G servo decoder for 2-position Slow-motion turnouts. Configurable to control eight 3-position semaphores. Works with compatible LocoNet Systems. Plug and play connections. Option setup switches for configuration. On-layout remote...- SKU:
- 245-DS78V
- Availability:
- Available. Current stock: 2
- Scale:
- All Scales
$97.95 -
Device "CurrentKeeper"
SoundTraxx
$36.75This 40mm x 6mm x 11mm DCC accessory maintains power to the decoder for up to 10 seconds during electrical interruptions. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 678-810140
- Availability:
- Available. Current stock: 7
- Scale:
- All Scales
$36.75 -
Device "CurrentKeeperII"
SoundTraxx
$36.75Not all models are made the same, and some are a TIGHT fit for a decoder installation. The CurrentKeeper is now available in two sizes to fit more models and make your installs easier! Keep more of your trains running even over dirty track and switches!...- SKU:
- 678-810160
- Availability:
- Available. Current stock: 7
- Scale:
- All Scales
$36.75 -
Device "K2"
Train Control Systems
$36.95TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. Newly-redesigned at half the size of a KA4, the KA2 will power HO or N scale locomotives with...- SKU:
- 745-1456
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$36.95 -
Device "KA4"
Train Control Systems
$36.95The Keep-Alive™ (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. KA4 will power an HO locomotive with headlights on for approximately 6 to 20 seconds (depending on...- SKU:
- 745-1668
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$36.95 -
Device "KA4-C"
Train Control Systems
$43.95TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The KA4-C will power an HO scale locomotive with headlights on for approximately 6 to 20 seconds...- SKU:
- 745-1667
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$43.95 -
Harness, "MC-MH", "MC"-series 7-pin plug to NMRA 8-pin plug, medium
Train Control Systems
$7.95- SKU:
- 745-1049
- Availability:
- Sold out after current stock is depleted.
- Scale:
- All Scales
$7.95 -
Harness, "MC-SH", "MC"-series 7-pin plug to NMRA 8-pin plug, short
Train Control Systems
$7.95- SKU:
- 745-1050
- Availability:
- Sold out after current stock is depleted.
- Scale:
- All Scales
$7.95 -
Harness, "MC-VO", 7- pin plug to NMRA 8-pin plug
Train Control Systems
$9.95- SKU:
- 745-1051
- Availability:
- Will not be listed after current stock is depleted.
- Scale:
- All Scales
$9.95 -
Harness, "T-1"", "T"-series decoder to 8 pin plug, 1"
Train Control Systems
$13.75See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 745-1359
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$13.75 -
Harness, 2-pin, "CurrentKeeper"
SoundTraxx
$9.95Easily connect a CurrentKeeper or extra capacitor to any SoundTraxx decoder equipped with a 2-pin "Quick Plug" to improve performance over dirty track and switches. See the "Manufacturer" page for general delivery and pricing...- SKU:
- 678-810158
- Availability:
- Available. Current stock: 2
- Scale:
- All Scales
$9.95 -
Interconnect board, input, for DS74
Digitrax, Inc.
$18.50Features: Input interconnect board for DS74. Provides plug and play connectivity for DS74 inputs. Supplied with ribbon cable to plug into DS74 10 pin Input header. ...- SKU:
- 245-DSXC4
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$18.50 -
Plug "21-HW-Male", European hardware, 21-pin (x5)
Train Control Systems
$34.50The 21-HW-Male is a circuit board with a 21-pin NEM660 (MTC21) connector and solder pads to connect wires. The male 21-pin socket may be used with any 21-pin decoder such as the WOW121 or EU621. The decoder can then be hardwired directly to your...- SKU:
- 745-1653
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$34.50 -
Plug, extension, NMRA, 8 pin
Train Control Systems
$6.95An extension plug for the NMRA 8-pin connector. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 745-1253
- Availability:
- Available. Current stock: 7
- Scale:
- All Scales
$6.95 -
Plug, NMRA, 8 pin
Train Control Systems
$6.958 pin NMRA plug, pre-made and ready for wires to be soldered on from a decoder, etc. Can be plugged into any locomotive with an 8-pin connector. NOTE: This product does not include wires. See the "Manufacturer" page for general delivery and pricing...- SKU:
- 745-1254
- Availability:
- Available. Current stock: 7
- Scale:
- All Scales
$6.95 -
Relay, miniature, 1A, 16V
ESU
$4.50"With our small relay, loads are controllable whose draw exceeds the decoder’s function output. Put the relay between output and load." See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 397-51963
- Availability:
- Available. Current stock: 5
- Scale:
- All Scales
$4.50 -
Test kit, decoder
SoundTraxx
MSRP: $3.28$2.50- SKU:
- 678-829001
- Availability:
- Sold out after current stock is depleted.
- Scale:
- All Scales
MSRP: $3.28$2.50 -
Tester, decoder
ESU
$63.50Decoders without any interface can be contacted with individual terminals. A quality coreless motor with flywheel serves in conjunction with LEDs indicating the direction for checking the motor output. Thus it is quite easy to check on the low speed...- SKU:
- 397-53900
- Availability:
- Available. Current stock: 2
- Scale:
- All Scales
$63.50 -
Tester, decoder/"LocoNet" cable
Digitrax, Inc.
$6.95It consists of a harness with 6 conductor Telco type wire with a male plug, a tester with a female 6 conductor jack, and a 100 Ohm 2 watt protection resistor. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-LT1
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$6.95 -
Wire, decoder, 30 AWG, black, 20'
Train Control Systems
$18.5020 foot lengths of 32 gauge wire. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 745-1219
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$18.50
Subscribe to our newsletter
Get the latest modelling news, store specials, and new arrivals delivered to your inbox.