Digital Command Control (DCC)
-
DCC AccessoriesDCC Starter SetsDecoders
-
Device "CurrentKeeper"
SoundTraxx
$36.75This 40mm x 6mm x 11mm DCC accessory maintains power to the decoder for up to 10 seconds during electrical interruptions. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 678-810140
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$36.75 -
Device "CurrentKeeperII"
SoundTraxx
$36.75Not all models are made the same, and some are a TIGHT fit for a decoder installation. The CurrentKeeper is now available in two sizes to fit more models and make your installs easier! Keep more of your trains running even over dirty track and switches!...- SKU:
- 678-810160
- Availability:
- Available. Current stock: 5
- Scale:
- All Scales
$36.75 -
Device "KA-N1"
Train Control Systems
$22.25This Keep Alive® has been specifically designed to be as physically small as possible. This product uses a slightly lower voltage and has a lower capacity compared to our larger Keep Alive products such as the KA1, KA4, etc., and is intended to be...- SKU:
- 745-2010
- Availability:
- Available. Current stock: 0
- Scale:
- N
$22.25 -
Device "PowerPack Mini" energy buffer
ESU
$57.75"The new ESU PowerPack Mini can be wired to all fourth and fifth generation ESU decoders. It reliably supplies energy to your locomotive when traversing dirty track or long turnout ladders. With its energy storage (1 Farad capacity) the unit...- SKU:
- 397-54671
- Availability:
- Available. Current stock: 2
- Scale:
- HO
$57.75 -
Device "PX108-10 Power Xtender"
Digitrax, Inc.
$35.75Features: For use with Digitrax decoders equipped with 6-pin function harness 8 ohm, 16mm x 26mm x 9mm box speaker included Keeps locos running during intermittent power interruptions resulting from dirty or bad track. 0.33F capacitance Use on...- SKU:
- 245-PX108-10
- Availability:
- Available. Current stock: 0
- Scale:
- HO
$35.75 -
Device "PX108-2 Power Xtender"
Digitrax, Inc.
$32.25Features: For use with Digitrax decoders equipped with 2-pin PX socket or solder pad connections Keeps locos running during intermittent power interruptions resulting from dirty or bad track. 0.33F capacitance Use on 10-18V track power Hold up time...- SKU:
- 245-PX108-2
- Availability:
- Available. Current stock: 0
- Scale:
- HO
$32.25 -
Device "PX108-6 Power Xtender"
Digitrax, Inc.
$35.75Features: For use with Digitrax decoders equipped with 6-pin function harness 8 ohm, 16mm x 26mm x 9mm box speaker included Keeps locos running during intermittent power interruptions resulting from dirty or bad track. 0.33F capacitance Use on...- SKU:
- 245-PX108-6
- Availability:
- Available. Current stock: 0
- Scale:
- HO
$35.75 -
Device "PX108-6F Power Xtender"
Digitrax, Inc.
$32.25Features: For use with Digitrax decoders equipped with 6-pin function harness Keeps locos running during intermittent power interruptions resulting from dirty or bad track. 0.33F capacitance Use on 10-18V track power Hold up time varies based on...- SKU:
- 245-PX108-6F
- Availability:
- Available. Current stock: 0
- Scale:
- HO
$32.25 -
Device "PX112-10 Power Xtender"
Digitrax, Inc.
$35.75Features: Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. Use with Digitrax Series 6 decoders with 10-pin sound harnesses such as SDH166D &...- SKU:
- 245-PX112-10
- Availability:
- Available. Current stock: 2
- Scale:
- HO
$35.75 -
Device "PX112-2 Power Xtender"
Digitrax, Inc.
$32.25Features: Keeps locos running during intermittent power interruptions caused by dirty or bad track. Hold up time varies based on actual decoder load & track conditions. Plug n'play installation on Digitrax Series 6 decoders such as DH126 and...- SKU:
- 245-PX112-2
- Availability:
- Available. Current stock: 0
- Scale:
- HO
$32.25 -
Device "PX112-6 Power Xtender"
Digitrax, Inc.
$35.75Features: Keeps locos running during intermittent power interruptions caused by dirty or bad track. Keeps sound from dropping out due to short power interuptions Hold up time varies based on actual decoder load & track conditions. Use with...- SKU:
- 245-PX112-6
- Availability:
- Available. Current stock: 0
- Scale:
- N
$35.75 -
Device "PX112-6F Power Xtender"
Digitrax, Inc.
$32.25Features: Keeps locos & sound running during power interruptions caused by dirty or bad track. Keeps light and other functions from dropping out due to power interruptions. Hold up time varies based on decoder load & track conditions. Use...- SKU:
- 245-PX112-6F
- Availability:
- Available. Current stock: 0
- Scale:
- N
$32.25 -
Diodes, remote sensing, 2 sections
Digitrax, Inc.
$13.85Eliminates the need for long runs of heavy gauge wire between the BDL168 & remotely located track sections. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-RD2
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$13.85 -
Hardware kit, signal mounting
Digitrax, Inc.
$13.85Holds your signal plugs at just the right distance from the layout to make it easy to plug in your signals. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-SMHK
- Availability:
- Available. Current stock: 0
- Scale:
- HO
$13.85 -
Harness, "MC-MH", "MC"-series 7-pin plug to NMRA 8-pin plug, medium
Train Control Systems
$7.95- SKU:
- 745-1049
- Availability:
- Sold out after current stock is depleted.
- Scale:
- All Scales
$7.95 -
Harness, "MC-SH", "MC"-series 7-pin plug to NMRA 8-pin plug, short
Train Control Systems
$7.95- SKU:
- 745-1050
- Availability:
- Sold out after current stock is depleted.
- Scale:
- All Scales
$7.95 -
Harness, "MC-VO", 7- pin plug to NMRA 8-pin plug
Train Control Systems
$9.95- SKU:
- 745-1051
- Availability:
- Will not be listed after current stock is depleted.
- Scale:
- All Scales
$9.95 -
Harness, "T-1"", "T"-series decoder to 8 pin plug, 1"
Train Control Systems
$13.75See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 745-1359
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$13.75 -
Harness, 2-pin, "CurrentKeeper"
SoundTraxx
$9.95Easily connect a CurrentKeeper or extra capacitor to any SoundTraxx decoder equipped with a 2-pin "Quick Plug" to improve performance over dirty track and switches. See the "Manufacturer" page for general delivery and pricing...- SKU:
- 678-810158
- Availability:
- Available. Current stock: 6
- Scale:
- All Scales
$9.95 -
Harness, 4-pin, 6 pairs
NCE Corp.
$14.95See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 524-309
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$14.95
Subscribe to our newsletter
Get the latest modelling news, store specials, and new arrivals delivered to your inbox.