Decoder Accessories
-
Decoder HarnessesDecoder Plugs/AdaptersDecoder TestersDecoder Wire
-
Plug, Digitrax 9 pin (x5) (N)
Digitrax, Inc.
$26.50Replaces 9 pin plug-equipped decoder for DC operation of locomotive. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-DNDP
- Availability:
- Available. Current stock: 0
- Scale:
- N
$26.50 -
Plug, extension, NMRA, 8 pin
Train Control Systems
$6.95An extension plug for the NMRA 8-pin connector. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 745-1253
- Availability:
- Sold out after current stock is depleted.
- Scale:
- All Scales
$6.95 -
Plug, NMRA, 8 pin
Train Control Systems
$6.958 pin NMRA plug, pre-made and ready for wires to be soldered on from a decoder, etc. Can be plugged into any locomotive with an 8-pin connector. NOTE: This product does not include wires. See the...- SKU:
- 745-1254
- Availability:
- Sold out after current stock is depleted.
- Scale:
- All Scales
$6.95 -
Test kit, decoder
SoundTraxx
MSRP: $3.28$2.50- SKU:
- 678-829001
- Availability:
- Sold out after current stock is depleted.
- Scale:
- All Scales
MSRP: $3.28$2.50 -
Tester module (x2)
Digitrax, Inc.
$17.95For use with BDL716, BDL16 Series Boards, BD4N, and other products. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-LT5C
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$17.95 -
Tester, decoder
ESU
$64.95Decoders without any interface can be contacted with individual terminals. A quality coreless motor with flywheel serves in conjunction with LEDs indicating the direction for checking the motor...- SKU:
- 397-53900
- Availability:
- Available. Current stock: 2
- Scale:
- All Scales
$64.95 -
Tester, decoder/"LocoNet" cable
Digitrax, Inc.
$7.25It consists of a harness with 6 conductor Telco type wire with a male plug, a tester with a female 6 conductor jack, and a 100 Ohm 2 watt protection resistor. See the "Manufacturer" page for general...- SKU:
- 245-LT1
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$7.25 -
Wire, decoder, 30 AWG, black, 20'
Train Control Systems
$17.7520 foot lengths of 32 gauge wire. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 745-1219
- Availability:
- Sold out after current stock is depleted.
- Scale:
- All Scales
$17.75 -
Wire, decoder, 30 AWG, stranded
Digitrax, Inc.
$20.25For decoder, lighting and signal installation. 10' lengths in 9 colours. See the "Manufacturer" page for general delivery and pricing information.- SKU:
- 245-DECODERWIRE
- Availability:
- Available. Current stock: 5
- Scale:
- All Scales
$20.25 -
Wire, decoder, ultra-flexible, 30 AWG, black, 10'
SoundTraxx
$10.50Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze. We offer 11 colours to match the NMRA and SoundTraxx standards. See the "Manufacturer" page for...- SKU:
- 678-810142
- Availability:
- Available. Current stock: 3
- Scale:
- All Scales
$10.50 -
Wire, thin (0.5mm o/d), 36 AWG, black, 10m length
ESU
$6.50"Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many...- SKU:
- 397-51942
- Availability:
- Available. Current stock: 6
- Scale:
- All Scales
$6.50 -
Wire, thin (0.5mm o/d), 36 AWG, blue, 10m length
ESU
$6.50"Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many...- SKU:
- 397-51949
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$6.50 -
Wire, thin (0.5mm o/d), 36 AWG, brown, 10m length
ESU
$6.50"Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many...- SKU:
- 397-51948
- Availability:
- Available. Current stock: 0
- Scale:
- All Scales
$6.50 -
Wire, thin (0.5mm o/d), 36 AWG, green, 10m length
ESU
$6.50"Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many...- SKU:
- 397-51945
- Availability:
- Available. Current stock: 2
- Scale:
- All Scales
$6.50 -
Wire, thin (0.5mm o/d), 36 AWG, grey, 10m length
ESU
$6.50"Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many...- SKU:
- 397-51946
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$6.50 -
Wire, thin (0.5mm o/d), 36 AWG, orange, 10m length
ESU
$6.50"Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many...- SKU:
- 397-51944
- Availability:
- Available. Current stock: 3
- Scale:
- All Scales
$6.50 -
Wire, thin (0.5mm o/d), 36 AWG, red, 10m length
ESU
$6.50"Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many...- SKU:
- 397-51943
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$6.50 -
Wire, thin (0.5mm o/d), 36 AWG, white, 10m length
ESU
$6.50"Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many...- SKU:
- 397-51940
- Availability:
- Available. Current stock: 1
- Scale:
- All Scales
$6.50
Subscribe to our newsletter
Get the latest modelling news, store specials, and new arrivals delivered to your inbox.